brands About us Links
HOME > MAXONIC > SIT Amplifier

SIT Amplifier

Field Coil Driver Units Speaker Systems SIT Amplifier

SIT (Static Induction Transistor) Amplifiers
SIT OPT Power Amplifier SD-011, SIT OTL Power Amplifier SD-013, SIT Line Controller SLC-021

1) Odd numbered harmonic distortion is almost zero due to SIT characteristics being equivalent to triode tube with low output impedance.
2) Least phase fluctuation because of excellent linearity in voltage amplification and full voltage drive.
3) Progressive signal-to-noise (S/N) ratio in SIT circuit boasting superior high frequency response and low level of noise generated inside semiconductors.
4) Large amount of thermal capacity proves thermal stability and less infection by temperature change.
5) Excess force in electric power can deliver significant power output, keep elemental device's resonant point low, and supports fine linearity of the output power.

SIT Drive version of a Power Amplifier with OPT
Integration of circuit engineers craftsmanship.

Max. Power Output 30W+30W/8 ohm
Frequency Response 5 ~ 80KHz
Total Harmonic Distortion Less than 0.1%
Power Source 100 ~ 240VAC
(multiple PSU)
Power Consumption 40W
Dimensions (mm) 430W x 197H x 363D
Weight 32.0kg

Semiconductor Amplifier merged with Direct Heating Triode Natured Tone
Energetic sounding due to all SIT circuitry.

Max. Power Output 100W+100W//8 ohm
Frequency Response 20 ~ 20KHz
Total Harmonic Distortion Less than 0.1%
Power Source 100V (50/60Hz)
Power Consumption 200W
Dimensions (mm) 430W x 197H x 363D
Weight 42.0kg

What is the mission of a Control Amplifier?
The circuit block diagram below is the answer after having pursued solution of the subject in Simple-is-the-best philosophy. That is to actively transmit source information without processing removing unnatural coloration.

Input/Output 1 Input/1 Output
Power Source 100VAC (50/60Hz)
Power Consumption 13W
Dimensions (mm) 180W x 140H x 360D
Weight 15.0kg

back to MAXONIC cover